Two medical casters with the same wheel diameter may have different mounting interfaces, heights and brake mechanisms. When sourcing replacement medical casters, start with the equipment manufacturer’s approved specification. Use measurements to identify a candidate and resolve differences before ordering, rather than assuming a visually similar part is interchangeable.
Identify the original part and its application
Record the equipment make, model and any caster part number or markings. Take clear photographs of the wheel, mounting connection and brake arrangement. Include a scale in close-up photographs, but use a dimensioned drawing for the final specification. Confirm whether the task is an approved replacement or a proposed change requiring the equipment manufacturer’s evaluation.
Measure the mounting interface
For a stem fitting, record its form, diameter and usable insertion length, together with any shoulder, retaining feature or fastening hole. For a threaded fitting, specify the thread designation and pitch. For a plate fitting, record the plate dimensions, hole diameters and hole spacing in both directions. Check the equipment-side connection as well as the removed part; a worn component may not represent its original nominal size.
- Use consistent units and show which surfaces each dimension refers to.
- Distinguish overall stem length from the portion that enters the socket.
- State whether plate holes are round or slotted.
- Ask the supplier to confirm dimensions against a controlled drawing.
Check height and the complete swivel envelope
Overall height runs from the mounting reference surface to the floor contact point. A different height can change the equipment’s level and clearances. Record the space needed as the caster turns, including the fork, wheel and brake pedal. Check nearby frame members, covers and accessories throughout the required movement. Wheel diameter alone cannot answer these fit questions.
Confirm the brake mechanism separately
A replacement must reproduce the required brake functions and interface. Note which pedal positions are provided and what each position does. A central locking caster also needs to match its operating linkage; a similar external shape is insufficient. Explore the DYU CC series when discussing central locking options, and supply the interface drawing with your enquiry.
Match performance requirements, not just dimensions
Provide the loaded equipment mass, floor conditions and cleaning requirements along with the measurements. Ask for the offered model’s applicable rating and documentation. Do not infer that a replacement will retain the equipment’s original load capacity or approvals simply because it fits. The equipment manufacturer or responsible engineering team should assess any proposed substitution.
Use a repeatable approval record
Before a bulk purchase, compare the candidate drawing against the approved requirements and evaluate a sample using the equipment manufacturer’s procedure. Document the model, drawing revision, fit checks and required functional checks. Keep this record with the order so purchasing and maintenance teams can identify the accepted configuration later.
DYU offers double wheel and single wheel caster ranges. Send the original part number, photographs and dimensioned drawing to discuss a candidate configuration. Model availability and suitability require confirmation for each application.
Prepared with AI assistance and checked for consistency with published DYU product ranges. This is a sourcing checklist, not an installation procedure or approval of a particular replacement.








